Carbon steel bender machine

Hei Yan is one of the most professional manufacturer of Carbon steel bender machine.
We adopts advanced technique to our pipe bending machine.
This technique can avoid the thickness problems that exist in the traditional technique. It can avoid the asymmetrical thickness phenomenon when bending the pipe.
If all the technical parameter are designed reasonable, this technique can ensure that the thickness of the pipe can be kept unchanged when bending the pipe, it can keep the bent pipe thickness same as the raw material pipe thickness.

Using this technique can push the same diameter 45degree, 90degree, 180degree etc various angle benders with one core rod. Then it has high efficiency.

Kindly contact us for more details of Carbon steel bender machine. We also manufacture elbow forming machine,pipe expanding machine,hydraulic press,tee machine,beveling machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.