Pipe Bent Machine

Hei Yan Int'L Development Limited offer wide range of pipe and section bending machines. Pipe Bent Machine is used for bending steel tubes and pipes and known for sturdy construction.

Specifications of the Pipe Bent Machine that we do:
 
1. Production range: OD21mm-1420mm
2. Radius: 2.5D-10D
3. Thickness: 10mm-80mm
4. Material: Carbon steel, Alloy steel, Stainless steel
5. Drive type: Hydraulic, chain

Our Bent Machines are rigid in construction, it's easy to operate and ensure accurate coiling and bending with minimum effort.

We also manufacture elbow forming machine,hydraulic pipe expanding machine,tee machine,beveling machine,please feel free to conatact us for your interested machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.