Elbow Maker

Elbow Maker is designed and constructed for manufacturing the small radius (1D/1.5D) carbon steel elbows, alloy steel elbows.
 
Hei Yan International can produce the following scope Elbow Maker:
 
1. Raw pipe for elbow producing: Seamless steel pipe,welding steel pipe or coiled steel pipe
 
2. Production scope of Elbow Maker:1"-60"
 
3. Thickness: 5mm - 120 mm
 
4.Angle available scope:22.5 degree ,45 degree,90 degree,135 degree.

Welcome to contact with us for more informaiton of elbow maker, and your interested pipe bending machine,pipe expanding machine, hydraulic press,pipe beveling machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.